DAP is not an email service (like, say, Aweber).

DAP is just a script – a tool, like Microsoft Outlook or Thunderbird – that simply sends out email using your web host’s email server.

It is your web host’s mail server that actually sends out the email to the recipient. So once DAP sends out the email, it has no control over what happens next.

It’s just like when you put your (regular mail) letter in the mailbox (post box). It is then up to the Postal Service to actually pick up your letter, and deliver to the destination address.

So if the emails that DAP sends out don’t get delivered to your recipients, there could be more than one reason for that.

Server Blacklisting

If your inexpensive (read as cheap shared web host is hosting a large number of sites on one server, and one of them knowingly sends out spam (or mistakenly gets flagged for spam), that will put the email deliverability of every web site on that server in jeopardy, because your site now shares the same IP address as that of an “alleged” spammer.

So your emails get sent to junk/spam folder by Gmail and Yahoo. Or worse, they just totally disappear into the ether.

Hourly Email-Sending Limits

Almost all shared hosts have hourly email sending limits. For example, DreamHost has an outgoing limit of 300 emails per hour. Which means, a total of only 300 emails can be sent out per hour through any web site hosted on DreamHost. All of the following count towards the 300 limit:

• Emails sent by any scripts on your site – like DAP
• Your WordPress blog notification emails
• Your WordPress admin emails,
• WP forgot password emails,
• WP comment notification emails,
• Forum notification emails,
• Forum emails sent to each other by your users,
• Forum-software Admin notification emails,
• Support software user and admin notification emails
• Tell-a-friend emails
• Viral-inviter type emails
• Emails sent through Outlook or Thunderbird where you have set the outgoing SMTP server to be your web site’s SMTP server
• Emails sent by others using the same SMTP server to send out emails-  like your business partners, employees, etc
• DAP User welcome emails, Payment notification emails, Forgot password emails, Autoresponder emails, Broadcast emails, etc

So do you see how quickly you can go over that hourly limit of 300 emails per hour?

But here comes the worst part

Once you go over that limit, any emails that are actually sent by you or the scripts running on your site, will not actually result in any kind of error. The mail server will respond by saying that the email(s) has been sent successfully, but in reality, on the backend, it quietly “snuffs out” the email. Which means, it doesn’t go anywhere – just gets sent to a “blackhole”. So you keep thinking that you sent out the email. DAP keeps thinking it has sent out the email. But in reality, the emails never actually get sent.

This is the same as you actually putting your letter into the mailbox at the Post Office. But then, imagine this: The postal worker who comes to pick up your mail, quietly goes to the back of the post office and dumps it all into one giant trash can, and destroys all of the mail. So you’re thinking you actually mailed out that important check to pay your utility bill. But the utility company never gets your check, and they slam you with a late fee.

Possible Solutions

1) DAP + Aweber (most expensive, most reliable)

2) DAP + 3rd party SMTP service provider (Fusemail.com or SMTP.com) (less expensive than Aweber, slightly less reliable too)

3) DAP + Good web host (cheapest, can have mixed results – all depends on your host).

You could always use DAP and external SMTP service provider like Fusemail.com or SMTP.com to send out bulk mail through DAP while totally bypassing your web host’s email system. This is probably the next best thing to using a service like Aweber.

And if you can’t afford even that, then simply use DAP on a good web host. We ourselves use just DAP and Dreamhost’s email servers to send out emails to all of our users.

And DAP also has built-in job queues to schedule outgoing emails while also making sure that you don’t exceed your web host’s hourly email sending limits (dreamhost’s limit is 300 emails/hour, I think). We use multiple SMTP servers from our own other web sites, all combined to be able to send a few thousand emails per hour.

But even with a lot of planning, it is easy to go over the hourly limit.

So the next time you see in your Job Queue that emails were sent out successfully, but the recipient never received it, here are some things to check:

1) It landed in your recipient’s junk/spam folder. Ask them to whitelist or add your email address to their contacts list.

2) You have overshot the limit, so you would have to actually send out the email again.

3) Try to send out broadcasts during a low-traffic time – say like later in the night – when you’re not actively sending out emails, and using up precious email counts from that hourly quota.

1. Remove the “ThankYou-Email Subject” and “ThankYou-Email Body” from the Product into which you wish to import users. Save it in a text file for later, and save the Product.

2. Go ahead and do the bulk-add of users from “Users > Add > Bulk-Add Multiple Users To A Product”.

3. Wait for the DAP Hourly Cron to run and finish importing all users. Since the “ThankYou-Email Subject” and “ThankYou-Email Body” of the Product is empty at the time of import, DAP won’t send out those emails.

4. Once all the users have been imported, put back the “ThankYou-Email Subject” and “ThankYou-Email Body” text content, and save the Product.

OPTIONAL

5. At a later point, if you want, you can send out an Autoresponder email or a Broadcast email with the merge codes for the email and password, if you want the newly imported users to get their passwords.

%%FIRST_NAME%%

This will be replaced by the first-name of the user.

%%LAST_NAME%%

This will be replaced by the first-name of the user.

%%EMAIL%%

This will be replaced by the email id of the user.

%%PASSWORD%%

This will be replaced by the password of the user.

%%SITE_NAME%%

This will be replaced by whatever text you have entered in “Setup > Config > Basic > Site Name” in your DAP Dashboard.

%%ADMIN_NAME%%

This will be replaced by whatever text you have entered in “Setup > Config > Basic > Admin Name” in your DAP Dashboard.

%%ADMIN_EMAIL%%

This will be replaced by whatever text you have entered in “Setup > Config > Basic > Admin Email” in your DAP Dashboard.

%%AFF_LINK%%

This will be replaced by the actual affiliate link of the member (Eg., http://yoursite.com/dap/a/?a=1234)

%%SITE_URL_DAP%%

Replaced by your actual web site url (Eg., http://yoursite.com)

%%UNSUB_LINK%%

This is replaced by a 1-click Unsubscribe link that you can add to the bottom of your outgoing broadcast and autoresponder emails.

We often get asked why use Aweber (or other third-party list service) when DAP itself is an autoresponder.

So here’s a brief overview of when and why it makes sense to use DAP or Aweber.

Why Aweber

DAP is not an email service like Aweber.

DAP is just a tool – like Outlook or Thunderbird – that simply sends out email using your web host’s email server.

If your inexpensive shared web host is hosting a large number of sites on one server, and one of them sends out spam (or mistakenly gets flagged for spam), that will put the email deliverability of every web site on that servver, in jeopardy, because your site now shares the same IP address as that of an “alleged” spammer.

So your emails get sent to junk/spam folder by Gmail and Yahoo. Or worse, they just totally disappear into the ether.

Your customers never get your email. Your campaign suffers. Your conversion plunges.

This won’t happen with Aweber.

Aweber (and other premier email service providers) have staff on hand, spend a lot of time, money and resources dealing with regular ISP’s (like AOL and SBC) to make sure their lists – and their reputation – remain clean.

Which is probably why they shut down large lists without much of a warning to you, and do other similar crazy stuff. I guess it works for them – and the other Aweber users, because when you send out an email through your Aweber list, it almost always gets there in your recipient’s inbox.

Which is very cool. Which is why they also charge so much for their service.

But if you can’t afford their high fees, then you can of course use DAP’s built-in email autoresponder, whose deliverability is only as good as your host’s spam reputation

Of course, you can always use DAP and external SMTP service provider like Fusemail.com or SMTP.com to send out bulk mail through DAP while totally bypassing your web host’s email system. This is probably the next best thing to using Aweber only.

And if you can’t afford even that, then simply use DAP on a good web host. We ourselves use just DAP and Dreamhost’s email servers to send out emails to all of our users. And DAP also has built-in job queues to schedule outgoing emails while also making sure that you don’t exceed your web host’s hourly email sending limits (dreamhost’s limit is 300 emails/hour, I think). We use multiple SMTP servers from our own other web sites, all combined to be able to send a few thousand emails per hour.

So given a choice, here are your email options in the exact order listed.

1) DAP + Aweber: Match made in heaven

2) DAP + 3rd Party List Services: 2nd best option

3) DAP + Your Web Host: Very usable and workable option as long as you are hosting with a decent host.

Feel free to comment below if you have any questions.

In DAP, a “Product” is the same as what some would call as a “Membership Level“.

We call it a “Product” because you really are selling access to this “Product/Membership Level” as an actual product on your web site.

A Product is basically a collection of…

1. “Content” (blog posts/pages),

2. “Files” (.pdf, .mp3, .mp4, etc) and

3. “Emails” (autoresponder emails)

Think of a Product as one big bucket, into which you add some content, you add some files, you add some autoresponder emails, you set up how the content should “drip”, how the files should drip, how the “emails” should drip, specify if this is a “Recurring” product or a “One-Time” product, specify the price, is there a trial, etc.

Basically, this “Product” is what your members “Buy” access to (or you can also give them access on the backend, without them having to buy – for eg., to your JV partners or business associates).

Whatever content you want your members to have access to when they become a member, is what you would add to this product.

For example, if you are running a subscription site on “How To Train Dogs”, you could give your product the same name – “How to Train Dogs”. And to this product, you would add blog posts that you have created (like “Tools to buy”, “Dog Training 101″, “How to reward your dog”, etc).

You can set up Unlimited Products/Membership Levels in DAP. For instance, you can have 3 recurring membership levels (3 different products, called “Platinum Members”, “Silver Members” and “Gold Members”) – and you can add different content to each of these levels.

At the same time, you can have a 4th product – a one-time-sale product – called “Puppy Potty Training” where the buyer just gets access to 1 PDF report.

And you can have a 5th product – a one-time “Video” product – where the buyer gets access to a series of videos, all at the same time (no “dripping”).

A member can have access to one or more (unlimited) products at any given time.

Any time we say content, we mean WordPress blog posts, blog pages and regular files (PDF, zip, doc, mp3, mp4, swf, .jpg, etc).

Adding content/files means that as an admin, you can specify what content on your web site is part of this product, and you can go into each link and specify the access control for that file – like, is this content free or paid, when is it accessible to the user (on day #1, day #7, etc) – and for how long.

You can add content from your web site using the provided file browser within the “Manage Products” page, or you can also add using full URL’s (like http://www.YourSite.com/dogtraining/protect-this-post.html).

Adding emails means you can setup an email autoresponse to be a part of this Product, and that email can be configured to go out to the user after “X” number of days after she has joined, or on a specific date (in case your email is date- or time- sensitive. ]]> http://www.digitalaccesspass.com/doc/what-is-a-product/feed/ 6