So, let’s say you have say 3 membership levels: Silver, Gold and Platinum.

“Gold” will have all the content that “Silver” has, plus some more.

“Platinum” will probably have everything from “Gold”, plus some more.

So the way you could save time setting up all these 3 levels, is to either start with the lowest level, or the highest level.

Let’s say you start with the lowest level, “Silver”.

So create the “Silver” product fully, set up all the content dripping, email dripping etc.

And then once you’re done, while still editing the “Silver” product, click on the “Save as New” button (next to the “Save” button on the Product page).

That will create an exact duplicate of the “Silver” product – with all of its settings, content dripping and email dripping intact. And this copy will be called “Silver Copy” (just the text Copy added to the end). And this new copy will already be selected for you.

Now rename this new product from “Silver Copy” to “Gold”, save it, and then continue to add more content to it.

Then, finally, when “Gold” is fully ready, again do a “Save As New”, which would create a “Gold Copy” product.

Rename the “Gold Copy” product to “Platinum”, save it, and continue to add more content and emails to it.

Get the drift?

NOTE: On the flip site, you could also start by creating the “Platinum” product first, and then keep doing a “Save As New” and continue stripping out content to create the lower membership levels.

And then you want your actual blog content (where all of your posts show in reverse order), on a different page – like “Members” or “Lessons” or “Blog”.

Here’s how  you do it.

1. Create Static WordPress “Page”

Create a WordPress “page” that will become your blog’s new “static” home page. Let’s give it the title, “Home”. Publish your content within this WP page, and it could even have a sign-up form, or your “Buy” button(s). Publish it.

2. Create “Placeholder” WordPress page for your blog posts

Next, you create a new page which will not have any content, but will serve as a “placeholder” for all of your blog posts to be displayed in reverse chronological order, just like it would show up on any regular blog. In the example below, the page title is “Chapters”. You could call it “Lessons”, “Blog”, “Blog Posts”, “Member Blog”, etc.

3. Change WordPress Settings

In your WP Admin dashboard, go to “Settings > Reading”

a) Change “Front page displays” to “A static page“, as shown below.

b) In the drop down below…

For “Front Page“, pick the page you created in Step 1 above (your static “Home” page).

For “Posts Page“, pick the page you created in Step 2 above (your “Chapters” page).

That’s it.

To see a working example of a “static” home page in wordpress, which can be used as your Sales page or as a Squeeze page, see http://NBLEB.com/blog/

Oh, and none of this has anything to do with DAP, by the way. This is all WordPress.

Case 1: The video file is stored on your web site

By default, DAP can only protect files that are stored on the same web site where DAP is installed.

So if you install DAP on YourSite.com , then your files must also be located on YourSite.com. DAP installed on YourSite.com cannot protect files (.mp4, .mp3, .html, .pdf, .doc) that are stored on AnotherSite.com.

So assuming the files are stored on the same site as DAP, you can (and should) protect both the actual video file, as well as the blog post or page in which the embed-code for your video is published, by adding both to a Product.

This gives you 2 levels of protection for your videos:

Level 1: The blog post or page containing the video player code, itself is accessible only by authorized members.
Level 2: When an authorized user gets legitimate access to the page where the video is published (because they’re a paying member, say), even if they try to do a view source and figure out the location of the video (eg., http://yoursite.com/videos/howtovideo1.mp4) , and pass it around by email to their friends (or post the link in an online forum), their friends still can’t view the video, because the video link itself is protected by DAP.

If you have some text that you want the casual visitor (and Google) to read, but wish to protect only the video, then you could turn Sneak-Peek on (in Setup > Config > Advanced), insert a WordPress more tag (<!–more–>) into your post just where you want the content to start being protected, and put the video player’s embed code after the more tag.

Case 2: Video file is stored on Amazon S3

The only 3rd-party-stored video files that DAP can protect at this time are videos (and other files) that are stored on Amazon S3. DAP cannot do this by itself, but uses a special WordPress plugin called S3MediaVault.com , which is a plugin we developed specifically to make Amazon S3 videos play in your WordPress blog posts/pages. So again you get 2 levels of protection for your videos…

Level 1: DAP protects the post/page where the special S3MV video player code is embedded
Level 2: The S3MediaVault plugin makes sure that even if someone tried to do a view source and figure out the actual link to your Amazon S3 video, they still won’t be able to view the video.

WARNING: Video stored on other 3rd party video sites

DAP cannot protect, say, videos that are embedded from other 3rd party web sites like YouTube or Hulu. Of course, DAP can always protect the blog post or page itself that contains the video, but once an authorized user gets valid access to that blog page, they can see that it is a YouTube video (say), and then pass that YouTube video link to their friends, in which case DAP cannot protect that external YouTube video link.

Use two different browsers for testing. Not two different browser tabs, but 2 completely different browsers – like Chrome and FireFox, or FireFox and Internet Explorer. Log in as DAP admin using one browser, and then as a regular user in another browser. That way, you keep the access separate, and your testing will be clean and easy.

If you are using, say, Firefox, you are logged in to DAP admin, and are browsing your blog or trying to access content on your blog, then you will only have access to the content that the admin user has access to. You, as the DAP Admin, DO NOT have automatic access to every product by default. You will have to manually give yourself access to every product you create. And if you want yourself to have “PAID” access, then you have to mark yourself as “PAID”.

That is because, if DAP gave you automatic access to all products, then you will go ahead and protect a blog post, try to access that blog post, and DAP will give you access to that content because you as admin have automatic access to the product. And then you will wonder “Hey, I protected a blog post, but I’m still seeing it.

I have protected a blog post as part of a Product. But I can still access it.

Short Answer: If you have protected a post/page/file, try to access it, and are able to do it, then it means you DO have access to it. Now let’s troubleshoot so that you understand the “how” and the “why”.

• Have you added the blog post to a Product? If you don’t add it to a DAP Product, the post/page/file won’t be protected.
• Who are you logged in as? As DAP Admin? Or as a regular member?
• Now if you search for this user by email id or last name on the “Users > Manage” page, you will see that the user does have access to the product to which the post belongs

Are you already logged in a a user who has access to that link? Maybe logged in as DAP Admin, and that is why you are able to access the link? If so, either log out of DAP, or visit your blog in a completely new browser (if you’re logged in as DAP Admin in FireFox, then visit your blog using Internet Explorer).

I have protected a blog post as part of a Product. User has access to it, but still can’t access it.

Short Answer: If you have protected a post/page/file, try to access it, and are able to do it, then it means you DO NOT have access to it. Now let’s troubleshoot so that you understand the “how” and the “why”.

• Who are you logged in as? As DAP Admin? Or as a regular member?
• Whoever you are logged in as, make sure that user (admin user or regular user) has access to the product to which the post belongs
• Have you added the post as a “PAID” or as “FREE”?
• If you have marked the post as “PAID”, make sure the user also is a “PAID” user (either there must have been a real transaction, or you must have manually marked him as “PAID”). Because free users cannot access content that has been marked as “PAID”.
• Maybe the user’s access to the product has expired. Check the user’s “Access Start Date” and “Access End Date” for that product. The start date should be current (not be in the future) and the end date should be current (shouldn’t be in the past, which means his access to the product has expired)

I don’t want the links to all my protected blog posts showing up on my blog’s home page

Make sure you have “Sneak-Peek” turned off in the DAP Admin Config section. Once you do that, posts that are protected will not be displayed on the home page as well as if someone tried to visit the link directly.

Why do I see the “Lock” symbol on my blog’s home page?

It’s possible that you have no published posts (it’s a new blog), or you have probably protected all of the posts by adding them all to a DAP Product.

1) Open the file error.php that is stored in the /dap/inc/ folder.

2) RENAME it as (or COPY it as) customerror.php.

3) You can put ANY kind of HTML content within this. Images, javascript, css,, buttons, text, whatever. Any HTML can be used in this file.

4) Upload this new file customerror.php back to same folder /dap/inc/

5) error.php doesn’t matter any more. Whether you delete it, or just leave it alone, the fact that there is a customerror.php file in the same directory means that DAP won’t even bother about error.php any more.

6) Future updates of DAP will not touch your customerror.php file. So updates or upgrades will not mess with your custom error page copy.

DAP employes a very unique “Pay As You Go” model.

It’s very similar to the “Pay As You Go” model used by cell phone companies.

You pay first, then new content (or “cell phone minutes” in the mobile world) gets released to you. You stop paying, you don’t get new content (minutes).

So let’s say a member (Joe Customer) joined your membership site this month, and this is January. So he’s on Month #1 in January.

When he first signs up (free or paid trial, or actual 1st month’s subscription), then his start and end dates in DAP on your site look like this:

Start date: Jan 1, 2009
End date: Jan 31, 2009

(Of course, DAP uses actual dates like “01/01/2009″, but “Jan 1, 2009″ is easier to read for most people, especially an international audience – so using the above date format just for the purposes of this post).

Then, let’s say, his February subscription payment comes in. Now DAP “extends” his access to your content by a month. So now the dates look like this:

Start date: Jan 1, 2009
End date: Feb 28, 2009

Now your member Joe has access to all content from Jan 1 to Feb 28 (meaning, about 60 days worth of “dripped content”).

Then end of February, he decides to cancel his membership for whatever reason (or his credit card gets declined or rejected while processing payment for Feb). So no payment comes in for March.

Now because no payment came in, DAP doesn’t really do anything about his access dates. So they continue to stay at:

Start date: Jan 1, 2009
End date: Feb 28, 2009

So any content that you have configured to be dripped on, say, Day #61 (which is Month #3), won’t be available to Joe, even though he continues to remain an “Active” member within DAP, and continues to get your autoresponder and br0adcast emails, and even continues to have access to your affiliate program and continues to earn commissions.

Actually, it gets even better – just because Joe’s end date expired, he basically now has NO access to ANY content on your web site (even Month #1’s content).

[Note: Just so you know, DAP does have a feature to enable "Access to Previously Paid-for Content". Keep reading for details.]

Now all Joe has lost is just the “access to the content”.

So let’s say you exchange emails with him, ask him why he wanted to cancel, and try to convince him to come back (or get him to use a new, valid credit card).

Now remember that Joe is still at the end of February’s content (Month #2). So whenever the next payment comes in (be it in March, April, or 1 year later), Joe now gets access only to the 3rd month’s content, and not, say, the 10th month content.

So even though it is now say, May, because Joe’s next payment came in just now, his access dates now look like this:

Start date: Jan 1, 2009
End date: March 31, 2009

So that’s how DAP takes care of your content and makes sure that when members cancel or their payment doesn’t come in for whatever reason, your content cannot be accessed by unauthorized users.

But let’s say you want to be really fair and look like a “generous, honest” guy to your members. In that case, you want to make sure that if someone cancels their subscription 6 months after being with you, you don’t want to ’screw’ them just because they stopped paying you. Who knows, they’ll probably come back if you keep showing to them what kind of content you’re building. Or they may buy your other products.

So now you want to make sure that they get access to the last 6 months worth of content, for which they have actually paid for.

There is a Configuration element in DAP where you can just turn this feature on, and members can instantly start access all “Previously Paid-for Content”.

So that’s how DAP puts a unique twist on cancellations.

Refunds

“Refunds” are a slightly different animal than “Cancellations”. While a subscription “Cancellation” means you only have to stop access going forward, a “Refund” means you have to actually roll-back existing access by a month (or whatever your recurring cycle 3 is).

So, doing a refund takes a few steps.

1. Go into your payment processor (like Paypal.com, Authorize.net, etc) and refund the money
2. Now log into the DAP Dashboard on your site
3. Go to the “Orders” page, search for all of the user’s transactions by her email id
4. Click on the “Id” link for the transaction that you wish to refund
5. On the next page, you will see a “Refund” button. Click on that.
6. That will mark that transaction as a refund, and also create a new transaction with a negative value (same as value of original transaction, except negative in value)
7. DAP then rolls-back access for the user by a month (or “Recurring Cycle #3″ from the Product page). So if member is still in month 1, then user will lose access to the product. If member is on month 3, then their access will be rolled back to month 2.
8. Go back to “Manage > Users” screen, search for user by email, and make sure access is either rolled back, or access has been completely removed for that member.

So, browse to your blog in your browser, visit the category that you wish to protect on your blog. The link will probably look like http://www.digitalaccesspass.com/doc/category/livelinks/

So copy the link that you see in your browser (this is the “permalink” for that category), log in as DAP Admin, and add it to one of your products.

IMPORTANT:

When you add an entire category of posts to DAP, then all posts in that category – posts currently in that category, as well posts you will be adding in the future under that category – will all become automatically protected.

So if you add the entire category to DAP and then configure that “link” to be available on a certain day, or date, then remember that ALL posts within that category will automatically become available on that day or date.

WARNING:

Also remember that because you are adding an entire category of posts, and not individual posts, you won’t be able to configure individual posts within that category to be dripped at various times. Only the “category” link can be configured to be dripped, and not the individual posts within it.

1. Log in to DAP Dashboard and go to the “Products/Lists” page.
2. Select the product to which you want this blog post to be a part of
3. Scroll down to the “ContentResponder” section
4. On the left, you will see a list of blog posts & pages that have been published
5. Select one or more (hold Ctrl + Click to select multiple)
6. Click on “Add Selected Posts/Pages” to protect the posts/pages.
7. It will now show up on the right-hand side of the box.
8. Click on “Edit” next to the link to configure dripping.

How do I protect a file?

Use the “File Browser” on the “Products/Lists” page to browse through a folder on your web site, and next to each file, you will see an “Add” link. Clicking on that link will add that file to the product.

I have protected a blog post. But I can still view it without logging in.

1. Are you already logged in a a user who has access to that link? Maybe logged in as DAP Admin, and that is why you are able to access the link? If so, either log out of DAP, or visit your blog in a completely new browser (if you’re logged in as DAP Admin in FireFox, then visit your blog using Internet Explorer).

2. After you set up DAP, did you visit the “Permalinks” section and click on the “Save” button at least once (even if you didn’t make any changes to your permalinks structure)?

3. Have you added the blog post to a Product? If you don’t add it to a DAP Product, the post or file won’t be protected.

Can I protect an entire category of posts at one go?

Yes, absolutely!

See Protecting An Entire WordPress Category.

Why do I see all of the protected posts on my blog’s home page? (OR) I don’t want the links to all my blog posts showing up on my blog

Make sure you have “Sneak-Peek” turned off in the DAP Admin Config section. Once you do that, posts that are protected will not be displayed on the home page as well as if someone tried to visit the link directly.